Gas Accessories

A replacement contents gauge for Gaslow Multivalve LPG cylinders, designed to replace a damaged or faulty gauge and restore accurate cylinder level indication. Installation is straightforward. Simply remove the 2 x 1.5mm Allen key bolts retaining the existing gauge, remove the old gauge and fit the replacement gauge in its place.

Read more less

Gaslow Stainless Steel LPG Filling Hoses are durable, high-quality connection hoses designed for used with refillable LPG cylinders and vehicle filling systems. Featuring JIC brass fittings, these hoses are suitable for connection to refillable cylinder inlet valves and the brass filler valve fitted to the vehicle. For connecting No1 Cylinder to No2 Cylinder: 300mm or 600mm For connection to brass filler valve fitted to the vehicle: 1000mm, 1500mm, 2000mm, 2500mm or 3000mm

Read more less

The Gaslow LPG Fill Adapter Kit contains the three most popular LPG filling adapters used in the Europe, making it an ideal kit for motorhome and campervan owners travelling across Europe. Having the correct LPG fill adapter available allows you to connect your refillable LPG system to compatible LPG filling pumps while travelling. A key feature of this kit is the Gaslow Spanish LPG adapter, which incorporates a safety valve designed to provide additional protection when disconnecting from an LPG pump. This valved design helps reduce the risk of LPG escaping during disconnection. Set Includes: Spanish LPG Adapter France / Italy LPG Adapter Euro LPG Adapter (Germany, Austria, Belgium, Eire)

Read more less

The Gaslow Regulator T-Piece W20 is designed to join 2 pigtail outlets from your gas bottles to one existing bulkhead regulator. Supplied with an outlet washer and non-return valves, this fitting is intended for use in suitable gas systems you would like to connect to gas cylinders to your regulator.  This W20 MxFxF T piece is an alternative method of connection to the Automatic or Manual Changeover valve. Ideal as a replacement or installation component, the Gaslow Regulator T-Piece W20 - all you need is the corresponding gas pigtails. Always confirm thread compatibility and follow the manufacturer's installation instructions before fitting LPG components.

Read more less

We recommend that any installation is carried out and tested by a LPG Gas Safe Engineer. The Gaslow 90 Degree Fill Adapter 01-4210 is designed to make LPG refill hose installation easier where space is limited or access is restricted within the gas locker. Its 90-degree angled connection allows the filler hose to be routed horizontally rather than vertically, helping to avoid sharp bends and reduce unnecessary strain on the hose. This adapter is particularly useful when installing a filler point within a gas locker door. The angled connection helps accommodate the movement of the door as it opens and closes, reducing stress on the filler hose. The Gaslow 90 Degree Fill Adapter can also be fitted to the rear of a filler point to direct the hose towards the gas locker or work around obstructions behind the mounting position. It is a practical solution for installations where space, hose routing and connection clearance are important considerations.

Read more less

The Gaslow Braided Local Cylinder Connection Hose provides a simple and flexible way to connect local LPG cylinders to your Gaslow system. The hose screws directly into the Gaslow filler point, allowing you to connect any compatible gas cylinder adapter featuring a 21.8LH fitting. With a generous 1.5 metre length, it provides additional flexibility when positioning and connecting your LPG cylinder. For when connection to local LPG cylinders is required you may need one of the following adapters; Gaslow Jumbo 35mm Clip-On Gas Adapter: The Gaslow Jumbo Clip-On Adapter is designed for connecting Gaslow LPG systems to compatible gas cylinders commonly used in Norway, Spain, Portugal and some areas of southern Ireland.  Gaslow 20mm Clip-on Gas Cylinder Adapter: Designed to convert compatible 20mm clip-on LPG cylinders to a 21.8LH screw thread, allowing connection to compatible LPG equipment and regulator pigtails. Suitable for Elfi, Malice and Twinny French exchange gas cylinders when used with a regulator pigtail featuring a 21.8LH (Butane) thread. It can also be used with some other compatible UK exchange LPG cylinders.

Read more less

The Gaslow LPG Filler Point Mounting Bracket 01-4160 is designed to allow a 70mm LPG filling point to be mounted inside your vehicle's gas locker compartment. Specifically designed for use with Gaslow 70mm plastic filler pod kits, this revised bracket features a profile shaped to accommodate the filler body while helping maximise available space within the gas locker. Mounting the filling point inside the gas locker offers the advantage of making the entire Gaslow refillable cylinder system easier to transfer to a future vehicle, without leaving visible signs of the installation on your original van. Important Information: If mounted externally, the bracket may rust when exposed to salt water or road surface spray. Some LPG filling stations, both in the UK and on the continent, may refuse to fill cylinders if the gas locker door must be opened to access the filling point. Check filling station requirements before choosing your installation location.

Read more less

The Gaslow 70mm Recessed Body Mount Filler Point Housing is designed to securely accommodate one of Gaslow’s fixed Brass Bayonet LPG filler points. This recessed housing provides a neat and practical solution for body mounting your LPG filler point, helping create a clean, professional finish on your vehicle while keeping the filler point securely positioned.

Read more less

The Gaslow Regulator Adapter 01-1677 is designed to redirect the W20 connection on a 30mbar bulkhead-mounted regulator through 90 degrees, helping simplify installation where space is limited. This adapter is ideal for Gaslow refillable LPG system upgrades and installations requiring high-pressure hose connections in confined spaces. By changing the direction of the connection, it can help provide a neater and more practical hose routing solution. Please Note: The adapter may be supplied in a slightly different design depending on the supplier at the time of purchase. The design may vary, but the intended application is the same.

Read more less

The Gaslow W20 Automatic Changeover Head is designed to provide convenient and reliable gas supply management for twin-cylinder LPG systems in motorhomes, caravans and campervans. Automatically switching from the service cylinder to the reserve cylinder when the supply runs low, it helps maintain a continuous gas supply without the need to manually change over regulators. Designed to fit compatible 30mbar regulators manufactured from 2004 onwards with a W20 inlet thread, the Gaslow automatic changeover head offers flexible installation and can be fitted in any orientation to suit the regulator setup. We recommend that any installation is carried out and tested by a LPG Gas Safe Engineer. The changeover is operated with both gas cylinders turned ON, first drawing gas from the service cylinder with the vanes in the window showing green. When the gas levels run low, the sensing device automatically changes over to the reserve cylinder without interrupting the gas flow and the vanes show red, indicating changeover has taken place. An integrated non-return valve allows the depleted cylinder to be disconnected after changeover without interrupting the gas supply from the reserve cylinder, making cylinder replacement more convenient. No more disconnecting or re-connecting of regulators usually at the most inconvenient time. This automatic changeover will work with propane gas, butane gas and any mix of LPG gas. Please check regulator compatibility before ordering. This changeover head is intended for compatible 30mbar regulators with a W20 inlet thread. Please note this item is the changeover head only, we also sell a kit auto changeover valves, that comes with Pigtails, please see range here.

Read more less

These pigtails will NOT fit directly on to the outlet of Gaslow, Alugas and Calorgas butane gas bottles. If you want to use a auto changeover valve unit for these bottles please purchase Gaslow Automatic changeover Kit with BUTANE pigtails. The Gaslow W20 Automatic Changeover Head is designed to provide convenient and reliable gas supply management for twin-cylinder LPG systems in motorhomes, caravans and campervans. Automatically switching from the service cylinder to the reserve cylinder when the supply runs low, it helps maintain a continuous gas supply without the need to manually change over regulators. Designed to fit compatible 30mbar regulators manufactured from 2004 onwards with a W20 inlet thread, the Gaslow automatic changeover head offers flexible installation and can be fitted in any orientation to suit the regulator setup. The Gaslow Propane 0.45 Metre Rubber Regulator Hoses  are high-quality LPG hoses designed for use with compatible automatic and manual changeover valves, as well as single-cylinder wall-mounted regulator kits. Commonly known as pigtails, these hoses provide a connection between a propane cylinder and the regulator or changeover assembly. For continued safety and reliable operation, regulator hoses should be visually inspected at every service interval and replaced if damaged, deteriorated or otherwise unsuitable for continued use. We recommends replacing regulator hoses after five years in service. Please check the connection type and gas compatibility of your existing equipment before ordering. No more disconnecting or re-connecting of regulators usually at the most inconvenient time.

Read more less

The Gaslow Direct Fill Adapter is designed to fit directly onto the inlet elbow of a Gaslow refillable LPG cylinder, allowing the cylinder to be filled remotely away from the vehicle. The adapter connects directly to UK LPG filling pumps, providing a convenient option for filling a Gaslow refillable cylinder when it has been removed from the vehicle. A blanking cap is included to seal the inlet once the cylinder has been filled. Please Note: This adapter is not accepted on the continent. This adapter can only be used on a refillable cylinder that is taken to a Gas/LPG Filling plant, not a garage forecourt.

Read more less

We recommend that any installation is carried out and tested by a LPG Gas Safe Engineer The Gaslow LPG Filler Vent Pipe 2 Metre & Fittings Kit is designed for installations where an LPG refill hose needs to pass through a void or cavity within a vehicle. The kit provides a dedicated ventilation route to the outside atmosphere, helping to safely direct any LPG that may leak from the filler connections away from enclosed vehicle spaces. Ideal for a wide range of vehicle conversions and specialist applications, this kit can be used in campervans, motorhomes, catering vehicles and farrier vehicles where the filler hose passes through an enclosed area. It is particularly useful for installations where the filler point is separated from the gas tank by a vehicle cavity or where the filler connection enters the habitation area before passing through the floor to an underslung LPG tank. The kit is suitable for installations using a 1500mm or 2000mm LPG filler hose. The filler-end vent fitting is designed to be secured using the existing filler pod mounting screws, while the opposite end can be fixed using suitable self-tapping screws or bolts, depending on the installation. The Gaslow LPG Filler Vent Pipe Kit includes: 2x metre of convoluted pipe 2x end plates 2x 3mm neoprene gaskets 2x O ring 35 x 1.5 2x O ring 39 x 2 Designed to support safer LPG filler hose installations, this kit helps provide a suitable ventilation route where the filler hose passes through a vehicle void. Installation must follow the manufacturer's instructions and applicable LPG safety requirements.

Read more less

The Gaslow Autogas recessed Filling Kit comes complete with cap and housing in a Black finish together with fitting kit for mounting to the side of your caravan or motorhome.

Read more less

The Gaslow 70mm Recessed Body Mount Filler Point Housing is designed to securely accommodate one of Gaslow’s fixed Brass Bayonet LPG filler points. This recessed housing provides a neat and practical solution for body mounting your LPG filler point, helping create a clean, professional finish on your vehicle while keeping the filler point securely positioned.

Read more less

The Gaslow Propane 0.45 metre Rubber Regulator Hose is a high-quality LPG hose designed for use with automatic and manual changeover valves, as well as single-cylinder wall-mounted LPG kits. Often referred to as a regulator pigtail, this hose provides a reliable connection between a propane LPG cylinder and the regulator or changeover valve. Please note: For safety and reliability, regulator hoses should be visually inspected at every service interval and replaced if any signs of wear, damage or deterioration are found. We recommend replacing the regulator hose after 5 years in service.

Read more less

The Gaslow W20 Automatic Changeover Head is designed to provide convenient and reliable gas supply management for twin-cylinder LPG systems in motorhomes, caravans and campervans. Automatically switching from the service cylinder to the reserve cylinder when the supply runs low, it helps maintain a continuous gas supply without the need to manually change over regulators. Designed to fit compatible 30mbar regulators manufactured from 2004 onwards with a W20 inlet thread, the Gaslow automatic changeover head offers flexible installation and can be fitted in any orientation to suit the regulator setup. The Gaslow 21.8LH 0.45 Metre Rubber Regulator Hoses are high-quality LPG hoses designed for use with this automatic changeover valves. Commonly referred to as pigtails, these rubber regulator hoses provide the connection between a compatible gas cylinder and the regulator or changeover valve. Manufactured for use with compatible 21.8LH connections, each hose measures 0.45 metres in length, offering flexibility when connecting the gas supply to the regulator assembly. For continued safety and reliable operation, regulator hoses should be visually inspected at every service interval and replaced if damaged, deteriorated or otherwise unsuitable for continued use. We recommends replacing regulator hoses after five years in service. Please check the connection type and gas compatibility of your existing equipment before ordering. No more disconnecting or re-connecting of regulators usually at the most inconvenient time.

Read more less

The Gaslow 70mm Recessed Body Mount Filler Point Housing is designed to securely accommodate one of Gaslow’s fixed Brass Bayonet LPG filler points. This recessed housing provides a neat and practical solution for body mounting your LPG filler point, helping create a clean, professional finish on your vehicle while keeping the filler point securely positioned.

Read more less

The Gaslow 21.8LH 0.45 metre Rubber Regulator Hose is a high-quality LPG regulator hose designed for use with automatic and manual changeover valves, as well as single-cylinder wall-mounted LPG systems. Often referred to as a pigtail, this hose provides a reliable connection between the LPG cylinder and regulator or changeover valve. Please note: For safety and reliability, regulator hoses should be visually inspected at every service interval and replaced if any signs of wear, damage or deterioration are found. We recommend replacing the regulator hose after 5 years in service.

Read more less

The Gaslow WAVE Bluetooth Gas Level Monitoring Kit allows you to monitor the contents of your compatible refillable LPG cylinder directly from your smartphone. Using Bluetooth technology and the dedicated ROTAREX DIMES app, the Gaslow WAVE system provides an easy way to check your gas level, track consumption and receive low-gas alerts, helping you plan refills before you run out. Designed for use with compatible Gaslow and AluGas cylinders fitted with a Multi-Valve, the WAVE system connects a sensor to a wireless transmitter, sending gas level information to the app on your mobile device. The app is available for iOS and Android and offers a clear overview of your remaining gas, together with consumption graphs and configurable alarm thresholds. Monitor your gas level with confidence. The app allows you to set two alarm levels according to your preferences, giving you advance warning when your cylinder reaches a specified fill level. The current gas level can also be viewed without an internet connection, although historical consumption charts rely on cloud connectivity. The Gaslow WAVE kit is designed for straightforward installation. The kit includes: Hall sensor 0.5 – 4.5 V (RRD Remote Readout Dial) WAVE transmitter box with 1 m cable length (without batteries) Holder for WAVE Box with velcro fastener Allen Key with 2 screws for replacement Please note: The Gaslow WAVE Bluetooth Kit is not compatible with the Gaslow Remote Solenoid. It is suitable only for compatible Gaslow and AluGas cylinders incorporating the Multi-Valve. Check compatibility before ordering. Each cylinder requires its own WAVE kit to be monitored. For a twin-cylinder system, two kits are required to monitor both cylinders independently.

Read more less

The Gaslow Locker Vent Round 75mm 01-7164 is designed to provide ventilation for LPG gas lockers in caravans, motorhomes and campervans. This gas drop-out vent provides a ventilation area of 760 square millimetres, helping to facilitate the escape of heavier-than-air gases from the gas locker. Proper ventilation is an important consideration when installing and using LPG cylinders in enclosed compartments. The Gaslow round locker vent is designed for use in suitable gas locker installations where a dedicated drop-out ventilation opening is required. Always check the manufacturer's installation instructions and applicable LPG ventilation requirements to ensure the vent is suitable for your specific installation.

Read more less