Gas Accessories

Replacement contents gauge for the Gaslow Multivalve cylinder. Simply remove the 2 x 1.5mm allen key bolts that retain the gauge and replace with the new gauge.

Read more less

Gaslow regulator T-Piece with outlet washer and non-return valves. Use this T piece if you want to join 2 pigtail outlets from your gas bottles to one existing bulkhead regulator. This W20 MxFxF T pieces will do the job perfectly without you needing to buy a Automatic or Manual Changeover valve. Your gas bottles don't have to be refillable to use this joining T piece, it works perfect with exchangeable type gas bottles from 6kg up to 47kg - all you need is the corresponding gas pigtails.

Read more less

The Gaslow LPG Fill Adapter Kit comes with the three most popular LPG fill adapters that you will use in the UK and Europe for filling with LPG.   In this Kit: Euro adapter Acme adapter European / Spanish adapter Storage bag (optional)

Read more less

The Gaslow Braided Local Cylinder Connection Hose simply screws into the Gaslow filler point and now you can connect any gas cylinder adapter that has a 21.8LH fitting to the Hose. Length 1.5 metres

Read more less

The Gaslow Stainless Steel hose has SAE brass fittings to suit refillable cylinder inlet valves for connecting cylinders together.

Read more less

This bracket allows your LPG filling point to be mounted within your gas locker compartment. The profile allows more space in the gas compartment. Please note the filler body plastic casing are not included with the filler bracket shown. This type of installation allows easy transfer of the entire Gaslow refillable bottle system to a future van with no trace of the old system on the old van.   Please note that some garage forecourts may refuse the filling of your cylinders if you have to open the locker door to fill. this also applies on the continent when filling. Filling Point Bracket Dimensions: 100mm W x 105mm D x 150mm H

Read more less

The Gaslow 70mm Recessed body mount filler point housing is designed to take one of our fixed Brass Bayonet LPG filler points. Using this filler housing allows your gas systems filler point to be body mounted.

Read more less

The Gaslow Automatic Changeover is designed to be used with a twin cylinder gas system, designed for ease of operation and peace of mind. The automatic changeover fits onto any 30mbar regulator from 2004 with a W20 inlet thread. The changeover is operated with both gas cylinders turned ON, first drawing gas from the service cylinder with the vanes in the window showing green. When the gas levels run low, the sensing device automatically changes over to the reserve cylinder without interrupting the gas flow and the vanes show red, indicating changeover has taken place. Once changeover has taken place the internal non-return valve then allows you to disconnect your cylinder without switching off your gas supply. No more disconnecting or re-connecting of regulators usually at the most inconvenient time. This automatic changeover will work with propane gas, butane gas and any mix of LPG gas.   We also sell a kit auto change overvalves, that comes with Pigtails; - Automatic changeover valve kit + 2x PROPANE (POL) pigtails - Automatic changeover valve kit + 2x BUTANE pigtails

Read more less

These pigtails will NOT fit directly on to the outlet of Gaslow, Alugas and Calorgas butane gas bottles. If you want to use a auto changeover valve unit for these bottles please purchase 'Gaslow Automatic changeover Head Kit with 2x BUTANE pigtails'. The Gaslow Automatic Changeover is designed to be used with a twin cylinder gas system, designed for ease of operation and peace of mind. The automatic changeover fits onto any 30mbar regulator from 2004 with a W20 inlet thread.This kit comes complete with 2 Gaslow 21.8LH 0.45 Metre Rubber Regulator Hose's. (Propane)The changeover is operated with both gas cylinders turned ON, first drawing gas from the service cylinder with the vanes in the window showing green. When the gas levels run low, the sensing device automatically changes over to the reserve cylinder without interrupting the gas flow and the vanes show red, indicating changeover has taken place.Once changeover has taken place the internal non-return valve then allows you to disconnect your cylinder without switching off your gas supply.No more disconnecting or re-connecting of regulators usually at the most inconvenient time.This automatic changeover will work with propane gas, butane gas and any mix of LPG gas.

Read more less

The Gaslow Autogas recessed Filling Kit comes complete with cap and housing in a Black finish together with fitting kit for mounting to the side of your caravan or motorhome.

Read more less

The Gaslow 70mm recessed body mount filler point housing is designed to take one of our fixed Brass Bayonet LPG filler points. Using this filler housing allows your gas systems filler point to be body mounted.

Read more less

The Gaslow Direct Fill Adapter is designed to fit directly onto the inlet elbow of a Gaslow Refillable cylinder, to enable filling remotely from the vehicle. The direct fill adapter will connect onto any UK LPG pump. Comes with a blanking cap to seal off the inlet once filled. Please Note: This adapter is not accepted on the continent. This adapter can only be used on a refillable cylinder that is taken to a Gas/LPG Filling plant, not a garage forecourt.

Read more less

The Gaslow Regulator Adapter 01-1677 has been designed to bring the W20 connection on a 30mbar bulk head regulator round 90 degrees.  

Read more less

The Gaslow Automatic Changeover is designed to be used with a twin cylinder gas system, designed for ease of operation and peace of mind. The automatic changeover fits onto any 30mbar regulator from 2004 with a W20 inlet thread. This kit comes complete with 2 Gaslow 21.8LH 0.45 Metre Rubber Regulator Hose's. (Butane) The changeover is operated with both gas cylinders turned ON, first drawing gas from the service cylinder with the vanes in the window showing green. When the gas levels run low, the sensing device automatically changes over to the reserve cylinder without interrupting the gas flow and the vanes show red, indicating changeover has taken place. Once changeover has taken place the internal non-return valve then allows you to disconnect your cylinder without switching off your gas supply. No more disconnecting or re-connecting of regulators usually at the most inconvenient time. This automatic changeover will work with propane gas, butane gas and any mix of LPG gas.

Read more less

The Gaslow 70mm Recessed body mount filler point housing is designed to take one of our fixed Brass Bayonet LPG filler points. Using this filler housing allows your gas systems filler point to be body mounted.

Read more less

The Gaslow Propane 0.45 Metre Rubber Regulator Hose is a High quality LPG hose for use with Automatic and Manual Changeover Valves, plus Single cylinder Wall mounted kits.  Regulator hoses should be visually inspected at every service interval and replaced if necessary. The regulator hose should be replaced after 5 years in service.

Read more less

The Gaslow 21.8LH 0.45 metre Rubber Regulator Hose is a High quality LPG hose for use with Automatic and Manual Changeover Valves, plus Single cylinder Wall mounted kits.  Regulator hoses should be visually inspected at every service interval and replaced if necessary. The regulator hose should be replaced after 5 years in service.

Read more less

The Gaslow 3.9kg or 4.5kg gas cylinder locker kit does not come with cylinders shown in picture. This black metal box which fulfils all the requirements for a gas safety locker in which to store your 2.7kg, 3.9kg or 4.5kg gas bottle. Each locker is leak tested and complies to BS EN 1949:2002 A3-2013. The box is manufactured from steel and is powder coated, access is via a completely removable front panel which is held in place by two quarter-turn latches. A rubber seal and 50mm high base tray ensure the safety of your gas storage. The lockers are supplied without holes cut for drop-out vents or gas pipes. Depending on your own installation you can place them wherever is appropriate. The national Caravan Council COP402 for Motorhomes states: Fire resistanceAny part of the gas compartment that is fitted so that the other side is in the habitation area of the caravan or motorhome shall be protected with fire resisting material with at least a 20 min fire resistance. An aluminium sheet of at least 0.5 mm thickness is considered as being acceptable. Gaslow's Gas locker being made from steel will withstand this 20 minute testing.   In this Kit: Gaslow 3.9kg & 4.5kg Single Cylinder Gas Locker - Dimensions: 430mm H, 280mm W, 290mm D (includes 20mm for the door latch knobs sticking out the front) Cavagna 30Mbar regulator 8mm Gaslow 21.8LH 0.45 Metre Rubber Regulator Hose  

Read more less

With the new Gaslow WAVE wireless module, you can now view the exact fill level of your cylinder on your mobile phone, get automated information about fill levels, have fill level warnings sent and maintain control of your gas consumption at all times. All on your smartphone with the addition of our accurate bluetooth kit and app. Each Gaslow Multi-Valve cylinder will require a Gaslow Wave Kit to display on the App. In this Kit: Hall sensor 0.5 – 4.5 V (RRD Remote Readout Dial) WAVE transmitter box with 1 m cable length (without batteries) Holder for WAVE Box with velcro fastener Allen Key with 2 screws for replacement Please note: The Gaslow wave will only work with Gaslow cylinders and AluGas cylinders that incorporate the Multi-Valve.   About Gaslow WAVE The NEW Gaslow WAVE system enables you to control your self-refillable gas cylinder contents through your smartphone with the addition of our accurate Bluetooth Kit.Our designated App for both iOS and Android will inform you about your gas level, usage and when you are running low of gas. User settings allow you to set your own alarm level depending on how early you want notification. Please note that the Gaslow Wave Bluetooth Kit cannot be used in conjunction with the Gaslow Remote Solenoid.   More time for you and your camping adventure Easy and flexible installation of the Gaslow Wave gauge Timely notice for the refill Connection via Bluetooth Your gas consumption at a glance A constant overview and display of the remaining amount of gas, no matter where you are.The app saves the consumption in a graphic so that you have control over your gas consumption at any time. Adjustable alarm settingsSet 2 alarm values to be notified in time when the specified fill level is reached. So you can always plan your visit to the gas station in advance. The perfect kitAll you need in one.An easy installation combined with the free app makes the Gaslow Wave system your best companion. FAQs  Why do I have to register and be logged in for the app to display data at all?The data is not stored locally on your phone, but centrally on a cloud server. This allows you to change your device without losing your data. To be able to allocate your data, Gaslow need user accounts. What is the GPS data needed for?The “DIMES” product range also includes a solution for stationary containers (heating) – to be able to offer corresponding services (e.g. automatic filling), the data must be evaluated (customer, location, fill level). Furthermore Gaslow plan to include all available LPG filling stations in a later version of the app. This will enable you to find the nearest petrol station directly in the app. Why does my tracking service have to be activated?The providers Apple and Android do not allow Bluetooth connection if tracking services are disabled. What data is collected and what happens to it?The data will be sent exclusively to (ROTAREX S.A.) the manufactures of the Multivalve. You can find further information at here I am asked for a PIN when configuring the app. Where is it located?The PIN is located on the sticker on the back of the module. Can I measure the level with the Gaslow Wave without an internet connection?The current fill level can also be read without an Internet connection. Only the charts/graphs are set up via the cloud server. The app is showing me a wrong fill levelIf the app is showing REFILL (empty) although you knowingly have a full gas bottle (or generally get a wrong display), this may be due to the special feature of the “first alignment” of the sensor. As this is a mechanical level sensor which transmits the fill level from the valve to the display unit via a magnetic connection, under special circumstances it is possible that the two magnets “jam” together. Only when the float is moved the magnets are correctly aligned (by gas extraction and/or by vibrations during travel). Alternatively, the magnet in the sensor can be influenced with an external magnet so that it is manually released. For this reason the app should be set up and tested during installation before the sensor is screwed together (in this case the sensor can be adjusted again manually using an external magnet. Unfortunately, this problem is due to the design and cannot be solved constructively. The problem only exists once – once the system is aligned, this problem will not reoccur. This could have produced an incorrect value during your first measurements (which is why the level seems to have increased). The plug can no longer be removed from the sensorThe plug connection is designed according to protection class IP54, which requires a good and secure connection. To release the connection, it is best to use a small (slotted) screwdriver, with which you press in the latch directly above the plug connection to be able to pull the plug upwards. Can several devices be connected simultaneously?The DIMES transmitter unit can only establish one connection at a time, but they can connect several devices (just not in parallel). This situation is due to the Bluetooth Low Energy (BLE) standard. How often is the data updated?The default frequency is 12 hours, under ANDROID (Apple unfortunately does not support this functionality) you can set the cycle yourself (Menu – Global Settings – Advanced Settings). Please enter the value in minutes (e.g. 120 for an automatic update every 2 hours). Please also consider that a shorter transmission frequency also means higher energy consumption (battery life).

Read more less

The Gaslow LPG filler vent pipe and fittings 01-4171 is used when you have to pass an LPG filler hose through a void in a vehicle. Using this kit safely removes any LPG that may leak from the filler fittings through to atmosphere, making your vehicle safe. This kit can be used on any vehicle, from a van conversion to a catering vehicle or even a farrier vehicle.    In this Kit: 2x metre of convoluted pipe 2x end plates 2x 3mm neoprene gaskets 2x O ring 35 x 1.5 2x O ring 39 x 2 We recommend that any installation is carried out and tested by a LPG Gas Safe Engineer This kit would be used when you use a 1500mm or 2000mm filler hose. the existing filler pod mounting screws are used to mount the vent fitting to the filler pod as shown in the photos. Locker end fitting can use either self tapping screws or bolts, depending on how you wish to fit. kit comes without screws or bolts.

Read more less

Gaslow gas drop out vent gives a ventilation area of 760 square mm for gas lockers.    In this Kit: 1 x Locker vent round 75mm 760sqmm  

Read more less